Wilo Wilo-Sevio AIR, Инструкция по установке и эксплуатации

Страница: 27 / 39

Installation and operating instructions Wilo-Sevio AIR 61
INSTALLATION English
5. Slide the other aerator pipe into the pipe coupling also up to the first marking.
6. Continue until the corresponding aerator pipes have all been joined in accordance with
the overview diagram.
7. In each case place a line of aerator pipes onto the base supports.
Aerator pipe / air distributor installation
Fig. 8.: Installing the aerator pipes with the air distributor
1 Pipe coupling with pipe clamp 4
Pipe coupling: aerator pipe connection
side
2 Air distributor 5
Pipe coupling: connection side with pipe
clamp for securing to the air distributor
3 Aerator pipe with disc aerator
1. Clean the outside of the pipe end of the aerator pipe, the outside of the connection
flange of the air distributor and the inside of the pipe coupling.
2. Check the round sealing rings in the pipe coupling for damage. Defective seals must be
replaced.
1. Wet the outside of the pipe end of the aerator pipe, the outside of the connection
flange of the air distributor and the inside of the pipe coupling with a liquid soap solu
-
tion (do not use grease or oil) .
2. Fit the pipe coupling onto the aerator pipe. Slide the pipe coupling up to the first mark -
ing on the aerator pipe. Ensure that the pipe clamp is not needed on this side.
3. Slide the pipe coupling with pipe clamp onto the connection flange of the air distributor
and secure the pipe coupling with the pipe clamp.
4. Also attach the other aerator lines to the air distributor in this manner.
5.4.7. Installing the drainage connection
Fig. 9.: Installing the drainage connection
1 Aerator pipes with disc aerators 3 Pipe connections
2 Drainage connection
The drainage connection forms the end piece of an aerator group. Accordingly, all aera -
tor lines must also be connected to it. The connection for the drainage line is also here.
The drainage connection is installed on an aerator pipe in the same way as the “aerator
pipe / aerator pipe” installation.
5.4.8. Securing the pipes
After the entire pipe system has been assembled, the aerator group can be affixed to
the base supports.