manualshive.com logo in svg

Wilo Wilo-Sevio AIR, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wilo Wilo-Sevio AIR Скачать руководство пользователя страница 10

44 

WILO SE 11/2012 Ed.03 DIN A5

English 

INTRODUCTION

1. 

Introduction

1.1. 

About this document

The language of the original operating manual is German. All other language versions 
are translations of the original German manual.
The operating manual contains a copy of the EC Declaration of Conformity.
Any unauthorized or unapproved changes made to the design specified in it will nullify 
this declaration.

1.2. 

Structure of the manual

The manual is divided into individual sections. Each section has a heading which clearly 
describes its content.
The table of contents also serves as a brief reference, since all the important sections 
have their own headers.
All the important operating and safety instructions are highlighted. For detailed infor

-

mation on the structure of these texts, see “Safety” in section 2.

1.3. 

Personnel qualifications

All personnel who work on or with the product must be qualified for such work; elec

-

trical work, for example, may only be carried out by a qualified electrician. All personnel 
must be of legal age.
Operating and maintenance personnel must also observe national accident prevention 
regulations.
It must be ensured that the personnel have read and understood the instructions in this 
operating and maintenance handbook; if necessary, this manual must be ordered from 
the manufacturer in the required language.
This product is not intended to be used by persons (including children) with limited 
physical, sensory or mental capacities or without the relevant experience or knowledge, 
unless they are supervised by a person responsible for their safety and receive instruc

-

tions from this person on how to use the product.
Children must be supervised in order to ensure that they do not play with the product.

1.4. 

Abbreviations

• 

p.t.o. = please turn over

• 

re. = regarding

• 

approx. = approximately

• 

i.e. = that means

• 

incl. = including

• 

min. = minimum

• 

max. = maximum

• 

etc. = and so on

• 

s.a. = see also

• 

e.g. = for example

Содержание Wilo-Sevio AIR








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды