background image

Installation and operating instructions Wilo-Sub TWU 3-...-HS (High Speed) 9

PRODUCT DESCRIPTION English

2.6  Fluids

Each fluid differs in respect of composition, cor

-

rosiveness, abrasiveness, dry matter content and 
in many other aspects. Generally, our pumps can 
be used for many applications. Please note that if 
requirements change (density, viscosity or general 
composition), this can also affect many operating 
parameters of the pump.
When using and/or replacing the pump in a differ-

ent fluid:

• 

The motor is filled with oil. The fluid can be 

contaminated by this oil if the mechanical seal is 
defective.

• When used in domestic hot water applications, 

all the parts in contact with fluid must be fit for 

the purpose. This must be checked in accordance 
with the local regulations and laws.

The pumps must not be used in wastewater and 

sewage and/or with fluids that are hazardous to 

health.

2.7  Sound-pressure

The submersible pump generates a sound-pres-

sure level of approx. 70 dB (A) during operation.

However, the actual sound-pressure level 
depends on several factors. These include, for 

example, the installation depth, installation, fixa

-

tion of accessories and piping, the duty point, 
immersion depth, etc.
We recommend that the operator should take an 
additional measurement at the workplace once 
the unit is running at its duty point and under all 
operating conditions.

CAUTION: Wear ear defenders! 

According to applicable laws and regula-

tions, ear protection must be worn if the 

sound-pressure level is 85 dB (A) or more! The 

end-user must make sure that this is complied 

with!

2.8 

CE marking

The CE marking is attached to the rating plate.

3  Product description

The pump is manufactured with great care and is 
subject to constant quality controls. Trouble-free 
operation is guaranteed if the device is installed 
and maintained correctly.

3.1 

Intended use and fields of application

ELECTRICAL hazard 

When using the pump in swimming pools or 

other basins that can be entered, there is a 

risk of electrocution. Note:

•  Use is strictly forbidden if there are people in 

the basin!

•  If there are no people in the basin, protec-

tive measures must be taken according to 

DIN EN 62638 (or the appropriate national 

regulations). 

RISK 

of fatal injury from magnetic field 

(TWU 3-...-HS-ECP)!

 

The permanently magnetised rotor inside the 

motor presents an acute danger to persons 

with pacemakers. Non-observance results in 

death or the most serious of injuries.

•  Do not open the motor!
•  Only allow Wilo customer service to disman-

tle and install the rotor for maintenance and 

repair work! 

•  Persons with pacemakers must follow the 

general behavioural guidelines that apply for 

handling electrical equipment when working 

on the pump!

NOTE 

(TWU 3-...-HS-ECP):

 

The magnets inside the motor do not pose 
a danger provided the motor is completely 
mounted. As such, the pump assembly does not 
pose a special danger to persons with pacemak-
ers, who can safely approach the pump without 
any restrictions.

DANGER 

– explosive fluids!

 

It is strictly prohibited to pump explosive 

fluids (gasoline, kerosene etc.). The pumps are 

not designed for these fluids!

The submersible pumps are suitable for:

• Water supply from boreholes, wells and rainwater 

storage tanks

• Domestic water supply, sprinkling and irrigation
• 

Pumping water without long-fibre and abrasive 

constituents
The submersible pumps must not be used for 

pumping:

• Wastewater
• Sewage/faeces
• Untreated sewage

Intended use includes compliance with this man-
ual. Any other use is regarded as non-compliant 
with the intended use.

3.1.1  Pumping drinking water

When used to pump drinking water, the local 
guidelines/laws/regulations must be checked to 
establish whether the pump is suitable for this 
application. 

The pumps do not comply with the specifications 

of TrinkwV and are not approved in accordance 
with ACS or local guidelines e.g. KTW and elasto-
mer guidelines.

3.2  Set-up

The Wilo-Sub TWU 3-...-HS is a submersible 

pump that is immersed in a stationary installation, 

either vertically or horizontally, and operated via a 

frequency converter.

Содержание Sub TWU 3-HS Series




























Отзывы: