Wilo SiFlux Series, Инструкция по установке и эксплуатации

Страница: 8 / 22

English
Installation and operating instructions Wilo-SiFlux 17
Immediately on conclusion of the work, all safety and protective
devices must be put back in position and/or recommissioned.
2.7 Unauthorised modification and
manufacture of spare parts Unauthorised modification and manufacture of spare parts will impair
the safety of the product/personnel and will make void the manufac-
turer's declarations regarding safety.
Modifications to the product are only permissible after consultation
with the manufacturer. Original spare parts and accessories author-
ised by the manufacturer ensure safety. The use of other parts will
absolve us of liability for consequential events.
2.8 Improper use The operating safety of the supplied product is only guaranteed for
conventional use in accordance with Section 4 of the operating
instructions. The limit values must on no account fall under or exceed
those specified in the catalogue/data sheet.
3 Transport and interim storage
The SiFlux is delivered on a pallet and is protected from moisture and
dust with a transparent plastic cover.
The equipment must be transported by means of authorised load
devices.
On arrival, inspect the pump immediately for any transport damage. If
damage is found, the necessary procedure involving the forwarding
agent must be taken within the specified period.
Before installation, the product must be kept dry, frost-free and pro-
tected from mechanical damage.
3.1 Attachment WARNING! Danger of personal injury!
Improper transport can lead to personal injury.
• The stability of the load must be ensured.
• The handling should be done by skilled staff and with authorised
equipment.
• Transport straps must be secured to the existing transport lugs or
placed around the base frame.
• The pipes will not withstand loads and should not be used to secure
loads in transit.
Labels on manifolds refer to these warnings (Fig. 5).
CAUTION! Risk of damage due to incorrect handling!
Loading the pipes in transit can result in leaks.
4 Intended use
Purpose The SiFlux is designed to ensure the flow in function of the pressure
difference on a HVAC installation (hot and cold water).
Fields of application They may be used for:
• Hot-water heating systems
• Cooling and cold water circulation systems
• Industrial circulation systems
• Heat carrier circuits
Restrictions Typical installation locations are technical rooms within the building
with other domestic installations. Installing the device directly in
other used rooms (residential and work rooms) is not intended.
Outdoor installation is not permitted for this series.
Fig. 5: Warning labels on manifold