Wilo SCPV, Инструкция по установке и эксплуатации

Страница: 29 / 37

Installation and operating instructions Wilo – SCV pumps 28
Recommended spare parts (Mechanical version)
No. Description Quantity Recommended Spare
Parts
1 Casing top half 1
2 Casing bottom half 1
3 Impeller
1
4 Shaft 1
5 Neck ring (Wear ring) 2 ‡
6 Impeller key 1
7 Shaft sleeve 2
8 O-ring 2
9 Cowl sleeve 2
10 Sleeve nut 4
11 Stuffing box bush 2
12 Mechanical Seal 2 ‡
13 Mechanical Seal Gland Plate 2 ‡
14 Stud for gland
2
15 Bearing end cover (Drive End) 1
16 Bearing (Drive End) 1 ‡
17 Bearing housing (Drive End) 1
18 Thrust collar 1
19 Bearing end cover (Non Drive End) 1
20 Stud for bearing end cover 1
21 Bush Bearing (Non Drive End)
1 ‡
22 Lock washer 1 ‡
23 Lock nut 1 ‡
24 Bearing housing (Non Drive End) 1
25 Hex plug –
26 Air cock 1 ‡
27 Hex screw for jacking 2
28 Studs for split flange –
29 Coupling key 1
30 Gasket 1 ‡
31 Water thrower 1
32 Steady pin –
33 Stud coupling 4
34 Sealing connection (Flushing Pipe) 2 ‡
35 Hex screw for bearing housing 8
36 4 way valve 2 ‡
37 Pump Stool 1
38 Motor Stool 1