Wilo PBI-L203MA, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 32

SAFETY INSTRUCTIONS
These instructions contain important information which must be followed when installing and operating the
pump. These operating instructions must therefore be read before assembly and commissioning by the installer
and the responsible operator. Both the general safety instructions in the "Safety precautions" section and those
in subsequent sections indicated with danger symbols should be carefully observed.
Safety precautions in these operating instructions which if not followed could cause personal injury are
indicated by the symbol: electrical warnings are indicated with:
The following symbol is used to indicate that by ignoring the relevant safety instructions, damage could be
caused to the pump/machinery and its functions:
●
Indication of instructions in the Operating instructions
The personnel installing the pump must have the appropriate qualifications.
●
Staff training
Failure to comply with the safety precautions could result in personal injury, damage to the pump, or damage
to the installation. Failure to comply with the safety precautions could also invalidate any claim for damages.
In particular, lack of care may lead to problems such as:
-Failure of important pump or machinery functions,
-Personal injury due to electrical, mechanical and bacteriological causes.
●
Risks incurred by failure to comply with the safety precautions
Existing regulations for accident prevention must be followed. Dangers caused by electrical energy
are to be excluded. Directives issued by the VDE German Association of Electrical Engineers and the local
electricity supply companies are to be observed.
●
Safety precautions for the operator
The operator must ensure that all inspection and installation work is carried out by authorized and qualified
specialists who have carefully studied these instructions. Work on the pump/machinery should only be
carried out when the machine has been brought to a standstill.
●
Safety information for inspection and assembly
Alterations to the pump or installation may only be carried out with the manufacturer's consent. The use of
original spare parts and accessories authorized by the manufacturer will ensure safety. The use of any other
parts may invalidate claims invoking the liabilitty of the manufacturer for any consequences.
●
Unauthorized modification and manufacture of spare parts
The operating safety of the pump or installation supplied can only be guaranteed if it is used in accordance
with paragraph 1 of the operating instructions. The limiting values given in the catalogue or data sheet must
neither be exceeded nor allowed to fall below those specified.
●
Unauthorized operating methods
ATTENTION!
5