Wilo NPG 100-315, Инструкция по установке и эксплуатации

Страница: 24 / 28

English
Installation and maintenance instructions Wilo-Horizontal pumps NP
G
8.2 Sectional drawings part list 8.3 General arrangement drawing
The typical general arrangement drawing and any
specific drawings required by the contract will be
sent to the Purchaser separately unless the con-
tract specifically calls for these to be included into
the User Instructions. If required, copies of other
drawings sent separately to the Purchaser should
be obtained from the Purchaser and retained with
these User Instructions.
9 Certification
Certificates determined from the Contract
requirements are provided with these instructions
where applicable. Examples are certificates for CE
marking, ATEX marking etc. If required, copies of
other certificates sent separately to the Purchaser
should be obtained from the Purchaser for reten-
tion with these User Instructions.
10 Other relevant documentation and
manuals
10.1 Supplementary User Instructions
Supplementary instructions such as for a driver,
instrumentation, controller, seals, sealant system
etc are provided as separate documents in their
original format. If further copies of these are
required they should be obtained from the sup-
plier for retention with these User Instructions.
Parts list
N
o
Designation
1110 Pump casing
1221 Casing cover
1221-01 Casing cover
1221-02 Casing cover
1500-01 Wear ring
1500-02 Wear ring
2110 Pump shaft
2250 Impeller
2450 Shaft sleeve
2450-01 Shaft sleeve
2540 Thrower
2905 Washer
2905-01 Washer
2905-02 Washer
2912 Impeller nut
3011 Radial ball bearing
3012 Radial roller bearing
3126 Shim
3134 Support foot
3200 Bearing housing
3260 Bearing cover
3260-01 Bearing cover
3260-02 Bearing cover
3712 Bearing nut
3853 Grease nipple
3863 Grease regulator
4120 Gland
4130 Gland packing
4200 Mechanical seal
4590-01 Gasket
4590-02 Gasket
4590-03 Gasket
4610-01 O-ring
4610-02 O-ring
6511 Priming plug
6515 Drain plug
6541 Lockwasher
6544 Circlip
6544-01 Circlip
6544-02 Circlip
6569 Screwed plug
6572 Stud
6572-01 Stud
6572-02 Stud
6572-03 Stud
6577-01 Hexagon head bolt
6577-02 Hexagon head bolt
6577-03 Hexagon head bolt
6581 Hexagon nut
6581-01 Hexagon nut
6581-02 Hexagon nut
6581-03 Hexagon nut
6581-04 Hexagon nut
6700-01 Coupling key
6700-02 Impeller key
7450 Various protection