Wilo FireSet UL FM, Инструкция по установке и эксплуатации

Страница: 47 / 913

English
6 WILO SE 08/2019
NOTICE:
Useful information on handling the product. It
draws attention to possible problems.
Information that appears directly on the product,
such as
• Rotation/direction of flow symbol,
• Identifiers for connections,
• Rating plate,
• Warning stickers,
must be strictly complied with and kept in a fully
legible condition.
2.2 Personnel qualifications
The installation, operating, and maintenance per
-
sonnel must have the appropriate qualifications
for this work. Area of responsibility, terms of ref
-
erence and monitoring of the personnel are to be
ensured by the operator. If the personnel are not in
possession of the necessary knowledge, they are
to be trained and instructed. This can be carried
out, if necessary, by the product manufacturer at
the operator's request.
2.3 Danger in the event of non-observance of the
safety instructions
Non-observance of the safety instructions can
result in risk of injury to persons and damage to
the environment and the product/unit.
Non-observance of the safety instructions lead to
the loss of any claims to damages.
In particular, non-observance can, for example,
result in the following risks:
• Danger to persons from electrical, mechanical, and
bacteriological influences,
• Damage to the environment due to leakage of
hazardous materials,
• Material damage,
• Failure of important product/unit functions,
• Failure of required maintenance and repair proce
-
dures.
2.4 Safety consciousness on the job
The safety instructions included in these installa
-
tion and operating instructions, the existing
national regulations for accident prevention,
together with any operator's internal working,
operating, and safety regulations are to be com
-
plied with.
2.5 Safety instructions for the operator
This device is not intended for use by persons
(including children) with reduced physical, sen
-
sory, or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the device.
• If hot or cold components on the product/the unit
lead to hazards, measures must be taken by the
customer to prevent them from being touched.
• Guards for moving components (such as the cou
-
pling) must not be removed while the product is in
operation.
• Leakages (for example, from the shaft seals) of
hazardous fluids (which are explosive, toxic, or
hot) must be led away so that no danger to per
-
sons or to the environment arises. National statu
-
tory provisions are to be complied with.
• Highly flammable materials should always be kept
a safe distance from the product.
• Danger from electrical current must be eliminated.
Local directives or general directives [for example,
IEC, VDE and so on] and instructions from local
energy supply companies must be adhered to.
• Danger from unintended start must be took in
account every time during installation, commis
-
sioning, normal use, and maintenance.
2.6 Safety instructions for installation and
maintenance work
The operator must ensure that all installation and
maintenance work is carried out by authorized
and qualified personnel, who have sufficiently
familiarized themselves with the installation and
operating instructions by studying them in detail.
Work on the product/unit must only be carried out
when at a standstill. The procedure described in
the installation and operating instructions for
shutting down the product/unit must be strictly
observed. Immediately upon completing work, all
safety and protective devices must be put back in
position and/or recommissioned. Danger from
unintended start must be took in account every
time.
2.7 Unauthorized modification and manufacture of
spare parts
Unauthorized modification and manufacture of
spare parts impair the safety of the product/per
-
sonnel and void the manufacturer's declarations
regarding safety.
Modifications to the product are only permissible
following consultation with the manufacturer.
Genuine spare parts and accessories authorized by
the manufacturer ensure safety. If other parts are
used, the manufacturer is no longer liable for any
consequences which arise from this.
2.8 Improper use
The operational reliability of the supplied product
is only guaranteed for intended use in accordance
with section 4 of the installation and operating
instructions. The limit values must on no account
fall below or exceed those values specified in the
catalogue/data sheet.