Wilo Atmos TERA-SCH, Инструкция по установке и эксплуатации

Страница: 46 / 100

en Disposal
46 WILO SE 2020-10
Recommended spare parts (mechanical seal version)
1
Bolts for bearing housing 8
2
Bearing housing (Drive End) 1
3
Bearing 2 •
4 Supporting ring 1
5
Bearing end cover (Drive End) 1
6
Water thrower 1
7
Mechanical seal cover 2 •
8
O-ring 2 •
9
Mechanical seal 2 •
10
Abutment ring 2 •
11
Hexagon plug –
12
Bolts for seal housing guard 4 •
13
Seal housing guard 4 •
14
Impeller key 1
15
Bolts for split flange –
16
Lifting bolts 2 •
17 Air cock 1 •
18
Jack screws for opening top housing 2
19
Hose Pipe 2 •
20
Top pump housing 1
21
Impeller 1
22
Bottom pump housing 1
23
Dowel pin for location –
24
Shaft 1
25
Wear ring 2 •
26*
Impeller nut 2
27
Dowel pin for wear ring 2 •
28
Bolts for mechanical seal cover 2
29
Bolts for bearing cover 8
30 Bearing end cover (Non-Drive End) 1
31
Lock washer 1 •
32
Lock nut 1 •
33
Bearing housing (Non-Drive End) 1
34**
Sleeve 2
35**
O-ring for sleeve 2
36**
Sleeve nut 4
Coupling key 1
Coupling guard Set •
Gasket paper 1 •
*Only mechanical seal version without sleeve; **Only mechanical seal version with
sleeve
Table 23: Recommended Spare Parts (mechanical seal version)
12 Disposal
12.1 Oils and lubricants
Operating fluid must be collected in suitable tanks and disposed of in accordance with
the locally applicable guidelines (e.g. 2008/98/EC).