Wills Wing Sport 2 155, Руководство по эксплуатации для владельца

Страница: 25 / 69

— 19 —
Check the sweep wire for wear and damage between the crossbar hinge brackets and where it
passes by the kingpost. Check the kingpost base bracket attachment to the keel.
Verify that the locknut and screw that secure the rear pulleyblock shackle to the sweepwire spreader
bar are secure.
Check the condition and the knot on the 4mm cord that secures the front pulleyblock to the crossbar
ball-center.
Check the condition and knots on the 4mm cord that restrains the crossbar center around the keel
Check the clevis pin hinge assembly and safety between the crossbar hinge brackets. Also check the
4 locknuts that secure the hingebrackets to the crossbar tube.
Check that the routing of all VG ropes and pulleys is clear and straight.
Check that the front keel pocket is secured to itself with the mating velcro surfaces, and that all VG
cables and ropes are inside the keel pocket.
Zip up the bottom surface.
At the nose
Check that the keyhole tang on the bottom front wires is fully engaged on the collar, and that the
button lock is properly engaged. Check that the keyhole collar is fully secured to the keel, and that the
mounting bolt protrudes at least slightly above the surface of the clinch nut pressed into the collar. If
you are platform towing, and have a nose line attached in this area, check to see that the nose line is
not routed in a manner in which it can apply any forward load against the bottom front wires or the
keyhole tang. (See the information on Towing elsewhere in this manual.)