Williams Allegro III, Руководство пользователя

Страница: 9 / 20

9
ALLEGRO III DIGITAL PIANO
WILLIAMSPIANOS.COM
OPERATIONS
Most of the front panel buttons are very straight
forward and easy to select for general functions.
In cases where you want to edit settings in
more depth you will need to use the front panel
buttons as well as the Function button and
Value buttons to change parameters.
Powering on Allegro III
Press and hold the POWER button in the upper
left corner of the front panel for two seconds.
The LED light in the button will stay on when
the piano is on. This product has a power
standby mode. If the piano turns off while you
are not playing it, this is likely due to the Power
mode being set to Auto Power off. To turn off
this function, hold the Function button and
press F#2 on the keyboard (below middle C).
Selecting Voices
The Allegro III piano has 10 built-in voices. Each
voice may be selected one at a time. They can
be layered to produce two voices at once, or
assigned to the left or right hands in the split
mode.
To select a voice, press the Voice Select button
that relates to the sound listed above the
button. The button will light and the LED will
indicate the selection.
Each voice has a variation sound. To select
that sound, first select the voice then press the
Variation button.
Original Voice Variation Voice
1. Grand Piano Bright Piano
2. Tine Electric Piano Reed Electric Piano
3. Perc. Organ Full Drawbar Organ
4. String Pad Synth Pad
5. Acoustic Bass Electric Bass
Layer Mode
To layer two sounds, press the corresponding
voices simultaneously. For example, hold
PIANO and press PAD to hear piano and strings
layered together. Both voice LEDs will light up
to indicate that they are layers.
To layer a sound with a variation:
1. Press and hold the first sound button
e.g. PIANO)
2. Press the layer sound button (e.g. PAD)
3. Still holding the first button (PIANO), press
the VARIATION button.
To return to normal, single voice mode, press a
single Voice button.
To layer a sound and a variation (e.g. Tine
E Piano and Reed E Piano), press the Voice
Select button twice. The button will flash to
indicate the layer.
To Change the Layer Volume Level
1. Press and hold the Variation button.
2. Press the + and - buttons to adjust the
layer volume.
To Change the Main Voice Volume Level
1. Press and hold the Piano button.
2. Press the + and - buttons to adjust the main
layer volume
SPLIT MODE
Split Mode allows the keyboard to be divided
into two sections so that different voices may
be played with the left and right hands. The
volume may be independently adjusted for each
voice, the Split Point (the highest note played
with the left hand) may be adjusted and the
Split Voice may be changed as desired.