Williams Allegro III, Руководство пользователя

Страница: 11 / 20

11
ALLEGRO III DIGITAL PIANO
WILLIAMSPIANOS.COM
Metronome Tempo Setting
While the metronome is on, pressing the Value
+ and – buttons changes the tempo.
To specify a tempo, press and hold the
Metronome buttons and enter the three digit
tempo using the 10-key pad. For example, hold
Metronome and press 0-9-2 for 92bpm.
Transpose Function
To transpose the piano keyboard by +12 or
-12 semitones, press and hold the Transpose
button and play a key around middle C of
the keyboard. Tra middle C is no
transposition. Tra Eb above middle C
transposes the piano sharp by 3 semitones.
The button will light up to show that the feature
is active. To disable transposition, press the
Transpose button.
Octave
To transpose the piano up or down by one
octave, press and hold the Octave button then
press the Value + or Value – button. The button
will light up to show that the feature is active. To
disable transposition, press the Octave button.
Piano Reset
If you want to quickly reset the keyboard to
the normal transposition and Octave ranges
you can you do this quickly by pressing the
Transpose and Octave buttons simultaneously.
RECORDING
Recording Your Own Song
1. Press the Song and Play buttons
simultaneously.
2. Once you start playing, the button LEDs
will flash to indicate that the recording
has started.
3. When you finish playing, press the SONG and
PLAY buttons again to stop the recorder, or
you can press PLAY only to stop the recorder
and hear your song.
TUNING
To Change Piano Tuning
You may need to adjust the tuning of the piano
by a few cents to match an acoustic instrument
or recording. To do this, hold the Transpose
button and press the Value + or Value – buttons.
EFFECTS
The Reverb, Chorus and ModFX effects may be
applied to each voice individually and will be
retained even when the power is turned off.
To apply these effects, press the associated
button. The button will light and the effect will
be heard when the piano is played.
To turn off the effect press the button of the
desired effect again and the LED light will
go off.
Reverb, Chorus, and ModFX settings are set
per Instrument and retained over power cycling.
Reverb
The reverb effect makes the piano sound like
it is in a large room. To change the reverb mix
amount, hold the Reverb button and press the
Value + or Value – buttons.
Chorus
Chorus effects add shimmering movement to
a voice. The setting can be subtle to extreme.
To change the Chorus depth, hold the Chorus
button then press the Value + or Value – buttons.