11
PhoneMax
®
Model TEL 030
Installation Guide & User Manual
In Case Of Difficulty
Can answer calls but cannot make them
The pulse/tone switch is set in the wrong position. Change it to pulse
mode.
No dial tone when you pick-up handset
There are a number of potential causes to this problem:
1. Cords on handset or phone are not plugged into jacks. Make sure con-
nectors are plugged in securely.
2. The cord could be damaged. If so, replace the cord.
3. The wall jack could be improperly wired. Check the wall jack for proper
wiring.
4. Your phone line could be out of order. Contact your local phone com-
pany.
Can make calls, but phone doesn’t ring for incoming calls.
There are a number of potential causes to this problem:
1. The handset may not be placed properly on the base. Make sure it is rest-
ing properly on the base.
2. The Ringer Volume Control may be set to OFF. Adjust the switch
to LO or HI. (The flashing ring indicator always indicates a call being
received.)
3. Too many phones or phone devices may be connected to the same line.
If so, remove other phones or devices from line.
4. Your older extension phone may cause the PhoneMax to cut off. If
so, install Williams Sound’s optional Equalizer Phone Accessory (TEL
007) in the line to the older phone. The Equalizer balances the amount
of phone line current drawn by older phones using the same line as the
Phonemax.
WARNING!
The PhoneMax is capable of amplifying sounds to a very loud volume. Always
set the VOLUME CONTROL to the SOFT setting before using the phone.
Instruct all potential users in its proper operation. Do not let children play with
the PhoneMax.
