William Kent 1733 ORION X1, Руководство пользователя

Страница: 34 / 36

34
the the straps are not twisted.
• Ensure that the harness lap straps are positioned as low as possible,
to support your child’s pelvis.
• Replace the device when it has been subjected to violent stresses
in an accident.
• It is dangerous to modify or add to the device in any way without
approval of the competent authority. It is also imperative to follow me-
ticulously the instructions provided by the manufacturer concerning
installation of the child restraint device.
• Keep the seat sheltered from sunlight, so that the child cannot get
burned.
• Do not leave children unsupervised while in a child restraint device.
• Make sure that luggage and other objects likely to cause injuries to
the occupant of the seat if impact occurs are firmly secured.
• Do not use the child restraint device without the seat cover.
• Do not replace the seat cover with a cover other than the one recom-
mended by the manufacturer, as it directly influences the behaviour of
the restraint device.
• If you are in any doubt about installation and proper use of your seat,
please contact the manufacturer of the child restraint device.
• Do not use load-bearing contact points other than those described in
the instructions and marked on the restraint system.
• Always give preference to rear seats, even if the highway code al-
lows installation at the front.
• Always check that there is no food debris or other such matter in
the buckle.
• In winter take care not to secure the child in with clothes that are
too bulky.
EN