Will Burt Night Scan Vertical 4.3-15, Руководство по эксплуатации

Страница: 36 / 128

PAGE 34 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
5.4 Attaching to the Vehicle
Read and understand all the mounting requirements in Section 5.1.
Note: The only section in Section 5.4 that applies to the Night Scan Vertical Complete is Section
5.4.2. The rest of the sections apply only to the Night Scan Vertical and Night Scan Vertical HDT.
This is because the Night Scan Vertical Complete arrives almost fully put together. For
information on how to attach the Night Scan Vertical Complete to the vehicle, see Section 5.4.2.
5.4.1 Night Scan Vertical Mounting Instructions
Physically attach the system as follows:
1. Drill six 3/8 inch mounting holes into the mounting structure (Figure 5-11).
2. Attach the mast using 3/8 inch studs or M10 bolts (customer-provided). Torque all hardware
as appropriate for its material and size.
3. The saddle is adjustable to accommodate all models of the RCP as well as variations in
mounting (Section 5.4.9, Figure 5-12). The saddle must be attached so that it is centered with
the RCP and mast base tube.
Note: The mast, RCP, and control box assemblies must be installed and wired prior to power up.
Failure to do so will result in errors and could damage the unit.