Will Burt Night Scan Vertical 4.3-15, Руководство по эксплуатации

Страница: 27 / 128

PAGE 25 OF 126
NIGHT SCAN VERTICAL, VERTICAL COMPLETE, AND VERTICAL HDT
OPERATING INSTRUCTIONS
TP-4836201-H
MAY 2021
3.5 Remote Control Options
There are three options for controlling the mast functions. Each option provides full system
control. These controllers all have two-way communication with the system and LED display that
include alphanumeric feedback. There are different controllers for dual-tilt and single-tilt RCP
applications. The dual-tilt versions have additional tilt buttons compared to the single-tilt versions.
See Figure 3-16 for a representative picture of each option.
Figure 3-16 Remote Control Options (not to scale)
The controllers can be used to operate all functions of the system and are as follows:
1. Wired Hand-Held Remote Control (HHRC): This option includes a 25 foot (7.6 meters)
quick connect coil cord and LED display. It also contains an integrated emergency stop
button.
2. Panel Mount Remote Control (PMRC): This option mounts to a panel and has LED display.
It also contains an integrated emergency stop button.
3. Wireless Hand-Held Remote Control (WHHRC): This option comes with a separate control
box that contains the transceiver. This control box is mounted separately from the mast. A
HHRC can be plugged into the wireless control box and used with the wireless control. Refer
to operating instructions TP-5543301 for installation and operation for the optional WHHRC.
The PMRC plugs directly to the system. The HHRC plugs into a bulkhead connector that can be
located remotely on the vehicle at the operator’s station. See Figure 3-17.
HHRC PMRC WHHRC