F-TECH POCKET
Page 15 of 20
©| Aerservice S.r.l. | 2019 all rights reserved
R
eproduction, in whole or in part, is not allowed.
FUNCTIONING
Description
2
Most frequent problems: causes and remedies
Most of the malfunctions occur for improper use of the system. Below are some possible malfunctions that
may occur, and the measures to be taken to remedy them.
FAULT TYPE
CAUSES
ACTION
The cleaner suddenly stops
Power outage
Restore the power supply
The fuse is burned
Change
Motor is burned
Repair or change
The yield of the mechanical
cleaner is decreased
Filters are dirty
Repair or change
Fumes are escaping
Wrong installation of the filters
Check the closures of the panels
and seals
Bad smell
Activated carbons filter full
Change
FUNCTIONING
Description
3
Risks and emergencies
Risks
Description hazards and specific protections
The manufacturer has taken steps to reduce the dangers that can arise due to incorrect use of the machine
by installing on the machine protection devices.
Description hazards cannot be eliminated by the security measures used
The dangers that cannot be eliminated by the security measures taken by the manufacturer are caused by
incorrect use of the machine or by a failure on the part of the user to heed the safety instructions in this manual
(refer to the above concerning the things do not do).
As already mentioned above we recommend the use of gloves and mask during cleaning and filter change, in
order to avoid the possible consequences to the operator.
Emergency situations
In case of fire:
-
Use a powder fire extinguisher comply with standards
-
Pay attention to the combustion gases (polyester filters and plastic electrical plant)