F-TECH POCKET
Page 14 of 20
©| Aerservice S.r.l. | 2019 all rights reserved
R
eproduction, in whole or in part, is not allowed.
INSTALLATION, COMMISSIONING AND START-UP
Installation
The unit should be installed by a qualified person and in accordance local area standards and regulations.
Mains input requirements are detailed on the equipment data plate.
Once fitted to a suitable mains supply make the connection of the hose for the conveyance of the fumes.
It is advisable to protect the unit from moisture.
WARNINGS
Before installation, check there is a suitable mains supply.
Commissioning
It is recommended to include the use of the device subject to the following environmental conditions:
-
The ambient operating temperature of the machine is between -10 ° C and 60 ° C
-
The humidity of the indoor environment in which the work is carried out must be between 0% and 90%
Recommendations / Instructions:
-
The elimination/removal of any waste materials should be carried out according to the regulations
-
For cleaning or replacing the filters using the mask and protective gloves.
ATTENTION:
Both containers and metal structures connected to it should be properly grounded as required by safety
regulations. Do not operate the machine without grounding.
Starting
After carrying out the above checks, turn on the unit with the switch on the panel and position the collector
hose near the pollutant source.
FUNCTIONING
Description
1
Normal use
The F-Tech Pocket has been designed and built for intermittent use.
The cleaner should be used exclusively for mechanical exhaust of smoke, fine dust, gas, gaseous pollutants
in low concentrations through the torch hood or hose. Remember that: the law allows recycling in the
environment only in case of occasional welding operations. The manufacturer is not liable for any use other
than as described.
DO NOT
-
Remove the air cleaner filter panels
-
In general, do not dismantle or remove any part of the unit when it is in use or connected to the mains
supply
-
Do not trap the power cord.
-
Do not tamper with the components of the electrical panel
-
Do not run the vacuum cleaner when the suction nozzle closed
-
Do not use the unit to pick up liquids
-
Do not place hot objects into the unit (e.g. cigarette butts)