F-TECH POCKET
Page 11 of 20
©| Aerservice S.r.l. | 2019 all rights reserved
R
eproduction, in whole or in part, is not allowed.
USE AND GENERAL CHARACTERISTICS
Description
1
Use
These units are suitable for businesses where the
welding operation is intermittent but still has the
presence of low concentrations of fumes, i.e. for
those who, for reasons dictated by their activity, must
perform welding in various areas where the need to
transport the purifier is a primary requirement.
FEATURES
Description
2
The F-tech Pocket is made by:
-
An outer painted steel structure, of suitable thickness, designed in such a way as to make the purifier
resistant to accidental impacts due to the use and to the movement. The unit is also equipped with a
convenient handle for ease of transport;
-
A filter section comprising a pre filter in metal wool with spark proof function, by one or two paper filters
pretreated depending on the version and an active carbon filter
;
-
An electric single-phase motor
;
-
A hose and suction nozzle with magnet and tube
;
-
An electric control panel and plug CEE norm
.
1.
Dust separator panel
2.
Side locks
3.
Non-sparking m
etal mesh
4.
Wing nut
5.
Filter
6.
Vacuum cleaner with brush motor
7.
Handle
8.
‘On -off’ switch
9.
Protection fuse
10.
Filter fixing screw
11. Activated carbons filter
12. Panell
13.
Air outlet slits
14.
Sound insulation
15.
Electrical cable
16.
Support feet
17. Flex hose L= mt 3
18. Aluminium hood with bracket
19. Support magnet