Wilhelmsen UNITOR UPC 310 ML, Инструкция по эксплуатации

Страница: 5 / 17

05
PREVENTION OF BURNS
To protect your eyes and skin from burns and ultraviolet rays:
- wear dark glasses. Wear suitable clothing, gloves and footwear.
- use masks with closed sides, having lenses and protective glass according to standards (degree of
protection DIN 10).
- warn people in the vicinity not to look directly at the arc.
PREVENTION OF FIRE
Plasma cutting produces splashes of molten metal.
Take the following precautions to prevent fire:
- ensure that there is a fire extinguisher in the welding area.
- remove all inflammable material from the immediate vicinity of the welding area.
- cool the cut material or let it cool before touching it or putting it in contact with combustible material
- never use the machine for cutting containers of potentially inflammable material. These containers must be
completely cleaned before they are cut.
- ventilate the potentially inflammable area before using the machine.
- do not use the machine in atmospheres containing high concentrations of powders, inflammable gases or
combustible vapours.
2 TECHNICAL DATA
Power supply 230V ±15% 1~50/60 Hz
115V +15%/-10% 1~50/60 Hz
Mains fuse minimum (Slow
blow) 230V: 16A
115V: 20A
Maximum power 230V: 2kVA
115V: 1,3kVA
Process power 86V – 15A
92V – 30A
Air supply
NB! Dry and oil free 5-5,5 bar
100 l/min
Duty cycle @ 40° 20% @30A
60% @ 18A
100% @ 16A
Power factor 0,99
Open circuit voltage 250V
Protection class IP 23
Environmental conditions Cutting: -10°C + 40°C
Transport and storage: -20°C + 55°C
Cooling Forced
Temperature class H
Dimensions L x W x H 430x160x350 mm
Weight 15,4 kg
Severance cut 230V: 12 mm
115V: 12 mm
Quality cut 230V: 10 mm
115V: 8 mm
Recommended cut 230V: 8 mm
115V: 6 mm