Wilfa Trysil 6500, Руководство по эксплуатации

Страница: 75 / 84

11
English
8
/
Press this button to operate the on/off for the healthy and scavenging functions in operating status. Press this button for the
irst time to start the scavenging function; the LCD will display ”
/
”. Press this button a second time to start the healthy and
scavenging functions simultaneously; the LCD will display“
/
” and “ ”. Press this button a third time to exit the healthy and
scavenging functions simultaneously. Press this button a fourth time to start the healthy function; the LCD will display “ ”.
Press this button again to repeat the operations above.
9 SLEEP
• Press this button to select Sleep 1 (
1
), Sleep 2 (
2
),Sleep 3 (
3
) or to cancel Sleep. Scroll between these selections after
the unit is powered on. Sleep Cancel is the default value.
• Sleep 1 is Sleep mode 1 in Cool, Dehumidify modes. The sleep status after running for one hour: the main unit
temperature setting will increase by 1 °C; after two hours: the temperature setting will increase by 2 °C and the unit will
continue to run at this temperature setting. In Heat mode, the sleep status after running for one hour: the temperature
setting will decrease by 1 °C; after two hours: the temperature setting will decrease by 2 °C and the unit will continue to run
at this temperature setting.
• Sleep 2 is Sleep mode 2, where the air conditioner will run according to a preset group of temperature settings along a
sleep temperature curve.
• Sleep 3, which is a Sleep mode containing DIY sleep curve settings:
(1) In Sleep 3 mode, press and hold the ”Turbo” button. The remote control will enter individual sleep setting status and
will display "1 hour". The temperature setting ield ("88") will display the corresponding temperature of the last setting
in the sleep curve and lash. (The irst entry will display in accordance with the initial sleep curve setting value from the
factory);
(2) To adjust, use the ”+” and ”-” buttons to change the corresponding temperature setting. After adjustment is complete,
press the "Turbo" button again to conirm;
(3) At this point the timer position on the remote control will automatically advance by 1 hour, i.e., to "2 hours", "3 hours",
"8 hours", etc., The temperature setting ield ("88") will display the corresponding temperature of the last setting in the
sleep curve and lash;
(4) Repeat steps (2) - (3) above until 8 hours of temperature settings have been input. The sleep curve set up is now
inished. At this point the remote control will revert to the original timer display and the temperature display will return to
the original temperature setting. The Sleep 3 DIY sleep curve set up can be reviewed:
• The user can use the sleep curve setting method to review the preset sleep curve. Enter individual sleep setting status
but do not change the temperature. Press the "Turbo" button directly to conirm. Note: In this presetting/review method,
if no button is pressed continuously within 10 seconds, the sleep curve setting status will automatically exit and revert to
the original display. Similarly, if the "ON/OFF", "Mode", "Timer" or "Sleep" buttons are pressed, the sleep curve setting/
review status will also exit.
10 TEMP
Use this button to select display of the indoor temperature setting or the indoor ambient temperature. When the indoor unit is
irst powered on, it will display the temperature setting. If the temperature display status is changed from another status to
”
/
”, it will display the ambient temperature. If within 5 seconds or 5 seconds later, the unit receives another remote control
signal, this will return the display to the temperature setting. If the user has not set up the temperature display status, the unit
will display the temperature setting.
11 QUIET
Use this button for Quiet status, which is available in Auto Quiet mode (display ” ” and ”Auto” signal), Quiet mode (display
” ” signal) and Quiet OFF (no signal for ” ” is displayed). After powering on, the unit defaults to Quiet OFF. Note: the Quiet
function cannot be set up in Fan and Dry mode; in Quiet mode (Display ” ” signal), the fan speed is not available.
12 CLOCK
Press the CLOCK button and will lash. Within 5 seconds press the + or - button to adjust the present time. Holding down
either button for more than 2 seconds will increase or decrease the time by 1 minute every 0.5 seconds and then by 10 minutes
every 0.5 seconds. While the display is lashing after setting, press the CLOCK button again to conirm the setting and then
will constantly display.
Trysil 6500_20_02_A4.indb 11 25.07.17 11.39