English
10
OPERATION
1. Place the heater on a flat surface.
2. Insert the power cord into a wall socket, make sure that the electrical
properties comply with the technical data 230-240V ~50Hz.
3. The glass panel heater has two different power modes. Set the heating
knob to “
” or “
” to start heating and adjust the thermostat
according to the desired temperature.
4. Once the room temperature is reached, slowly turn the thermostat knob
in counterclockwise direction until you hear a click and then the heater will
stop working.
5. The thermostat will switch on/off automatically to maintain the set heating
level.
6. Turn off the appliance by setting the heating knob “0” position to switch off
the heater, and unplug the appliance.
7. Frost protection function: The heater must be turned on. Turn the
thermostat knob counterclockwise to the minimum position. The unit will
turn on automatically if the temperature is lower than 5 degrees Celsius.
0
OFF (Stop)
750 W
1500 W
Содержание RAY CTG-1500W
Страница 2: ......
Страница 54: ......
Страница 55: ......
Страница 56: ...AS WILFA Industriveien 25 1481 Hagan Norway wilfa com CTG 1500W_20_03...