P.
8
Engelsk
P.
8
EngelskEnglish
8
LED DISPLAY
, shows the humidity in the room 35% ~ 95%.
If you press the “TIMER” button it will show the selected time
and after 8 seconds it will revert to showing the humidity in the
room (will display minimum 35%).
9
HUMIDITY
indicator, shows the selected dehumidifying,
,
40%, 50%, 60%, 70%.
10
TIMER indicator
will light up when the timer function is
operating.
11
POWER (ON / OFF) / indicator.
During normal operation, this
indicator will be lit up in green. The power indicator will flash when:
The unit is overturned.
The fan is on to reduce heat (after the power has been turned
off the unit will continue to run for 2 minutes to cool the unit
down).
12
WATER TANK INDICATOR
will light up in red when the
water tank is full or not in the correct position.
Operation
1. Plug the unit into a power socket. Ensure that the plug is
securely plugged in. (Please check that the label on the
product corresponds with the voltage on location).
2. Press the
POWER
button to turn the unit on. The unit will start
working in continuous mode.
3. Press the
HUMIDITY
button to set the humidity for the room.
4. Press the
MODE
button to select the fan speed, LOW, HIGH
or DRYING.
5. Press the
TIMER
button to select the desired operating time
for the appliance (1 - 24 hours).
6. To turn the unit off, press the
POWER
button again.
Important:
1. When turning the unit off it will take at least 2 minutes before
the unit turns off. The fan will run to reduce the heat inside the
appliance.
2. Do not use the unit without the air filter.
3. When the unit has been running continuously for 8 hours it will
stop for 2 minutes before turning back on again.
The fan will continue working for those 2 minutes.
To turn the unit off, press the “POWER” button (the se-
lected time will then be deleted).
Содержание DES-09W
