Wilfa 601690, Руководство по эксплуатации

Страница: 136 / 144

22
English
English
4. Put the rubber plug into the other side of drainage pipe, fix it with pipe hoop
and then fix it in the drainage pipe clip.
drainage pipe
pipe hoop
rubber plug
pipe hoop
drainage
pipe clip
Drainage way as follows:
1. In cooling or drying operation, the condensation water will be drained to the
chassis and spattered by water-striking motor. As the temperature of condenser
is high, most of the condensation water will be evaporated and drained to
outdoor. So usually, only a little condensation water will be accumulated inside
the chassis and you do not need to discharge
the water frequently.
2. When the chassis is full with water, the buzzer
will give out 8 sounds and ”H8” is displayed to
remind user to discharge water:
• Move the unit to a suitable place for emptying
of water; do not tilt the unit and keep it
horizontal during moving;
• Take the drainage pipe from the clip and pull
out the rubber plug on the drainage pipe to
empty the water;
• Put back the rubber plug onto drainage pipe
after finishing emptying water and then fix the
pipe on the clip;
• After full water protection is eliminated and the
compressor has been stopped for 3 minutes,
the unit will resume operation.