Wilfa 601690, Руководство по эксплуатации

Страница: 126 / 144

12
English
English
NOTICE:
• During operation, point the remote control signal sender at the receiving window on unit.
• The distance between signal sender and receiving window should be no more than 8m,
and there should be no obstacles between them.
• Signal may be interfered easily in the room where there is fluorescent lamp or wireless
telephone; remote controller should be close to the unit during operation.
• Replace new batteries of the same model when replacement is required.
• When you don’t use remote controller for a long time, please take out the batteries.
• If the display on remote controller is fuzzy or there’s no display, please replace batteries.
CLEAN AND MAINTENANCE
WARNING:
• Before cleaning the air conditioner, please turn off the unit and disconnect power.
Otherwise, it may cause electric shock.
• Do not wash air conditioner with water. Otherwise, it may cause electric shock.
• Do not use volatile liquid (such as thinner or gas) to clean the air conditioner. Otherwise,
it may damage the appearance of air conditioner.
Clean outer case and grille
Clean outer case: If there’s dust on the surface of outer case, please
use soft towel to wipe it. If the outer case is very dirty (such as grease),
please use neutral abluent to wipe it.
Clean grille: Use cleaner or soft brush to clean it.
Clean filter
① ②
➊ Remove the filter
➋
Clean filter
➌
Install filter
After the filter is cleaned and
dried, reinstall it well.
Use cleaner or water to clean the
filter. If the filter is very dirty (such
as grease), use warm water 40°C
(104°F) mixed with neutral detergent
to clean it and then put at shady
place to dry it.
NOTICE:
• The filter should be cleaned about once every three months. If there’s much dust in the
operation environment, you can increase clean frequency.