Wildview STC-TGLBC2, Инструкция по эксплуатации

Страница: 21 / 29

www.wildviewcam.com
Toll Free 888-­‐304-­‐6125
21
(Option #2)
Simply remove the batteries from the battery compartment. If you are using
an SD memory card as your storage device, you must delete images by
following the step described above.
Low Battery Indicator:
Your camera is equipped with a low battery indicator. The Red Low Bat LED
indicator will blink when battery is running low.
1. Turn off the camera.
2. Download all the pictures immediately.
NOTE: DO NOT attempt to replace the batteries before you have saved the
images in your PC. Once the batteries are drained completely, or if you
attempt to replace the batteries, all images in the internal SDRAM memory
will be lost.
3. Replace batteries. Be sure to use brand name alkaline batteries.
WARNING: Do not remove the batteries until you have downloaded all the
images off the internal SDRAM. Once the batteries are removed, all files in
the internal SDRAM will be deleted. (This does not apply to files stored on
SD memory card).