Wildview STC-TGLBC2, Инструкция по эксплуатации

Страница: 12 / 29

www.wildviewcam.com
Toll Free 888-­‐304-­‐6125
12
•
Burst: To set the number of pictures the camera will take per PIR
triggering.
Ø
Preset to 3 continuous image capturing per PIR triggering.
•
FULL: When the external memory capacity reaches full, the front LCD
screen will show “FULL.”
•
Flash: Preset to Auto.
Set Date and Time
NOTE: The following setting must be performed before you use the camera.
1. Turn on the camera by sliding the CAM switch to the ON position.
2. Press and hold the [SET] button for 2 seconds to enter Date & Time
setting mode. The word “TIME” and first two digits of the time HH will
blink.
3. Press the [UP] or [DN] button to adjust the Hour.
4. Press the [SET] button to enter minute setting. Time & MM will blink.
5. Press the [UP] or [DN] button to adjust the Minute.
6. Press the [SET] button to enter the month setting. Date & MM will blink.
7. Press the [UP] or [DN] button to adjust Month.
8. Press the [SET] button to enter date setting. Date & DD will blink.
9. Press the [UP] or [DN] button to adjust Date.