Wildview STC-TGLBC2, Инструкция по эксплуатации

Страница: 13 / 29

www.wildviewcam.com
Toll Free 888-­‐304-­‐6125
13
10. Press the [SET] button to enter year setting. Date & YY will blink.
11. Press the [UP] or [DN] button to adjust year.
12. Press and hold the [SET] button for 2 seconds or until the Date icon stops
blinking to exit the Setting mode, and enter into PIR count down mode.
The display will show date and number of pictures taken.
13. Once the program setting has been completed, slide the CAM switch to
the OFF position until you are ready for field use.
WARNING : Date & Time setting will be lost whenever the batteries are
removed from camera. You must re-­‐set the Date & Time stamp after you
replace the batteries.