• select
Repeaters
in the menu
• select a Repeater(s) you want to add to the chain and click on
Register Repeater(s)
• now you have 5 minutes to turn on the Repeater(s)
• LED of the Repeater should turn solid green in several seconds, if it fails (solid RED) please
repeat the steps after the reboot of the base station
Note:
• If you have any problems with registering Repeater(s) you can reset it by pressing the reset button
on the back side. While the Repeater is off, turn on the repeater, LED becomes solid RED and then
GREEN with a double pulsation. You can start the registration procedure again by following the last
three points above.
• The Repeater should be placed on a distance not less than 10 meters from its Base station.
!
!
LEDs of the Repeaters
!
• LED blinks green with a double pulse during the first registration process
• LED blinks green during the connection process
• LED remains solid green when it is registered to a base station
• LED blinks green with a fast pulse when a phone connected to the Repeater starts a new
call, during the conversation it blinks red
• LED becomes solid red if the Repeater fails to connect to the base station
!
!
!
!
!
!
!
!
!
!
!
W-AIR Administrator’s Manual
11
