7. Alarms setting (Wildix W-AIR 150)
7.1. Prerequisites
Emergency settings are defined and controlled from the web interface of the base station.
Triggering an alarm is possible only from the
Wildix W-AIR 150 handset
.
FW Version:
Starting from 03.23.00.19
7.2. Types of alarms
Wildix W-AIR 150 supports five types of alarm.
Alarm Button
This alarm is triggered by long-pressing (3 seconds) the red button on top of the handset.
Pull Cord Alarm
The Pull Cord alarm can be triggered by pulling a cord containing a magnet from the pull
cord hole on the right side of the handset.
Running Alarm
To trigger the Running Alarm the handset needs to be shaken up and down for several
seconds.
Man Down Alarm
The Man Down alarm is triggered if the handset remains in the position with an angle over
60 degrees with respect to the horizontal. The time for the handset to be still before the alarm
is triggered can be set on base station web interface (read the next chapter 7.3. Set up
emergency profiles)
No Movement Alarm
To trigger the No Movement alarm the handset needs to be in no movement. The timeout
after which No Movement alarm is triggered is set on the base station web interface.
7.3. Set up emergency profiles
Go to the menu “Alarms”. In this menu eight different alarm profiles can be configured. The
parameters that can be configured are:
Profile Alias
: A user friendly name to help identify the different profiles when selecting which
one to enable for individual handsets.
Wildix W-AIR System - Administrator’s Manual 3.80.x
16
