Wilding CPS 10, Руководство по установке

Страница: 6 / 18

Mattress Box
Step 6: This step will require two people.
One person will kneel down in front of
the Mattress Box and lift it up about 4 to 5
inches while the second person positions
the upper socket end of the Lift Piston
directly over the ball stud on the upper an-
chor plate and snap it into place. The first
person may need to raise and lower the
Mattress Box slightly to allow the Piston
to snap on. Repeat step on opposite piston
to be snapped into place. (Illustration 2)
Step 5: Spread the Side Board tops so
the Mattress Box has clearance to pass
through the Mattress Box Stops on the
Side Boards. (Illustration 1)
Snap
Mattress Box Stop
Illustration 1
Snap Left side board
Base board cut out
Piston
Mattress box (slightly raised)
Upper anchor plate
Lower anchor plate
Illustration 2
Grommet
Hole
Upper Anchor Plate
Left Side Board
Mattress Box
Piston
Lower Anchor Plate
Step 4: Attach the lower end of the Lift
Piston (skinner end) onto the Lower An-
chor Plate on both sides of the Mattress
Box by positioning the socket end of the
piston directly over the ball stud on the
anchor plates and pushing them on. The
piston socket will snap into place over
the ball.
Lift Piston Illustration
Lower end Upper end
Piston Socket
Page 4