Wilding CPS 10, Руководство по установке

Страница: 5 / 18

Step 1: Position the Mattress Box and the
right and left Side Boards face down on the
floor with the bottom of the Mattress Box
approximately 2.5 feet from the wall where
the bed will be installed.
Step 2: With a pair of pliers, remove the
E-clips from the pivot posts on the Side
Boards. Leave the white nylon spacers in
place on the posts.
Step 3: Slide the Side Board pivot posts
through the pivot holes in the Mattress
Box as illustrated. Replace the E-clips.
Base board cut out
Upper Plate
Male Pivot post
(E-clip attached)
Bed Stop
Bridge board
Connecting bolts
Headboard Connecting
Bolts
Side Board Illustration
Finished edge
For ease of assembly, familiarize yourself with side board parts below.
(Right side board shown)
Base board/Stretcher
Connecting Bolts
Left Side Board
Mattress Box
Mattress Box Top
E-clip
Installation
Wall
Right Side Board
NOTICE: THE ILLUSTRATIONS IN THESE INSTRUCTION SHOW ASSEMBLY
WITH EXAM CABINET ON THE RIGHT. YOUR CABINETS AND CABINET PARTS
MAY VARY FROM THESE DRAWING IN THE FORM OF A MIRROR IMAGE.
Grommet
Page 3