Installing Batteries
Open the door at the bottom of the camera by
unlatching the locking tabs.
1.
With the camera facing open, open the battery
compartment cover by sliding the latch to the
left.
(Illustration A and B)
2.
With the bottom of the camera
towards you, load two C-cell batteries
with the positive ends towards you in
the left battery chamber and load two
C-cell batteries with the negative
ends towards you in the right battery
chamber.
3.
Close battery compartment cover. To
latch the cover simply pull the latch
slightly to the left as you close the
battery compartment cover.
4.
Load SD memory card
(up to 32GB not
included)
into the SD card slot with the
connectors facing up.
5.
Illustration A
Illustration B
POWER
TIPS:
Make sure the SD Card is unlocked (small
switch on the side of the SD Card) or the
camera LCD will read “LOCK”.
page 3
page 4