Wildfire Ranch Pro WF-PRO30G-RH Series, Руководство по эксплуатации

Страница: 11 / 36

10
Gas Requirements
NOTE: Wildfire strongly recommends that a qualified service technician perform
the initial installation and all conversions or modifications to the gas supply.
Never attach an unregulated gas line to the appliance. Connection to an unregulated gas
line can cause excessive heat or fire and the risk of property damage, bodily injury, or death.
Gas valves are preset at the factory to operate on liquid propane or natural gas.
If you wish to convert, be sure to contact your grill dealer FIRST!
IMPORTANT:
Before connecting your grill to a gas source, make sure grill control knobs are in the “OFF”
position.
• Verify the type of gas supply to be used, either natural or liquid propane, and make sure the marking on the
appliance rating label agrees with that of the gas supply. Do not connect a Wildfire liquid propane gas grill
to a natural gas supply, and do not connect a Wildfire natural gas grill to a liquid propane gas supply.
• All pipe sealants must be an approved type and resistant to the actions of LP gas. Never use pipe sealant
on flare fittings.
• The installation of this appliance must conform with local codes or, in the absence of local codes, with
either National Fuel Gas Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane Installation Code,
CSA B149.1, or Propane Storage and Handling Code, B149.2, or the Standard for Recreational Vehicles,
ANSI A 119.2/ NFPA 1192M, and CSA Z240 RV Series, Recreational Vehicle Code, as applicable.