14
FUEL BED LAYOUT (COAL)
The following instructions detail how the ceramic fuel bed and loose components are to be installed
onto the appliance. Great care should be taken when handling these ceramic parts as they are fragile
and can easily be broken. Do not force any component into position, if it does not fit easily then you
are not fitting the part correctly. These instructions can also be followed to remove or reinstall the fuel
bed after cleaning. This is a procedure that can be undertaken by the customer as required and the
frequency will be depend upon use.
Step 1
Fit the fuel bed into the appliance as shown in the picture below.
Step 2
Fit the front ceramic rail in front of the burner as shown in the picture below.
