Wilden PS 4 Stallion Metal, Инженерия, эксплуатация и обслуживание

Страница: 8 / 28

WIL-10440-E-03
Wilden
®
8
PERFORMANCE
PS4 PLASTIC
RUBBER-FITTED
Ship Weight ...... Polypropylene 18 kg (40 lb)
PVDF 24 kg (52 lb)
Air Inlet................................................ 3/4"
Inlet ................................. 38 mm (1-1/2")
Outlet ................................ 38 mm (1-1/2")
Suction Lift ................... 5.9 m Dry (19.5')
8.3 m Wet (27.2')
Disp. Per Stroke 1 ................... 1.0 L (0.26 gal)
Max. Flow Rate .......... 379 lpm (100 gpm)
Max. Size Solids ................. 4.8 mm (3/16")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example: To pump 238 lpm (63 gpm)
against a discharge head of 2.1 bar
(30 psig) requires 4.1 bar (60 psig) and
59 Nm
3
/h (35 scfm) air consumption.
Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump's performance curve.
PS4 PLASTIC
EZ-INSTALL TPE-FITTED
Ship Weight ...... Polypropylene 18 kg (40 lb)
PVDF 24 kg (52 lb)
Air Inlet ............................................... 3/4"
Inlet ................................. 38 mm (1-1/2")
Outlet ................................ 38 mm (1-1/2")
Suction Lift ................... 6.2 m Dry (20.4')
8.3 m Wet (27.2')
Disp. Per Stroke 1 ................... 1.0 L (0.26 gal)
Max. Flow Rate .......... 378 lpm (100 gpm)
Max. Size Solids ................. 4.8 mm (3/16")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example: To pump 269 lpm (71 gpm)
against a discharge head of 2.8 bar
(40 psig) requires 5.5 bar (80 psig) and
88 Nm
3
/h (52 scfm) air consumption.
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Section 5
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump's performance curve..