Wilden PS 4 Stallion Metal, Инженерия, эксплуатация и обслуживание

Страница: 19 / 28

WIL-10440-E-03
Wilden
®
19
Disassembly / Reassembly
Step 10
Using an O-ring pick, gently remove the
O-ring from the opposite side of the
dimpled-end of the pilot spool. Check for
nicks, gouges or other signs of wear;
replace pilot spool assembly if necessary.
Step 11
Remove modulator spool from center
section. Check for wear to spool or O-ring
and replace if necessary.
Step 12
Remove and inspect the shaft bushings (2).
Replace if necessary.
Step 13
Once the air chambers have been
removed, the square air valve nuts
(6) may be removed or replaced
if necessary.
Step 14
Inspect the center block Glyd ™ rings (2) for wear. If replacement is necessary, use an
O- ring pick to remove the used Glyd™ rings then replace with genuine Wilden
replacement parts.