10
WILDEN PUMP & ENGINEERING, LLC
WIL-10060-E-03
P E R F O R M A N C E
A2P METAL
RUBBER-FITTED
A2P METAL
PTFE-FITTED
[Nm
3
/h]
[LPM]
[Nm
3
/h]
[LPM]
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily operation parameters
will fall in the center of the pump’s performance curve.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily operation parameters
will fall in the center of the pump’s performance curve.
Height .................................. 279 mm (11.0")
Width ................................... 267 mm (10.5")
Depth .................................... 229 mm (9.0")
Est. Ship Weight ........... Aluminum 12 kg (26 lb)
Stainless Steel 16 kg (36 lb)
Alloy C 18 kg (40 lb)
Air Inlet ......................................6 mm (1/4")
Inlet ............................................ 25 mm (1")
Outlet ......................................19 mm (3/4")
Suction Lift ...................... 6.55 m Dry (21.5')
8.99 m Wet (29.5')
Disp. per Stroke ............... 0.20 L (0.054 gal)
1
Max. Flow Rate ................. 121 lpm (32 gpm)
Max. Size Solids .....................3.2 mm (1/8")
1
Displacement per stroke was calculated at 4.8 bar
(70 psig) air inlet pressure against a 2 bar (30 psig)
head pressure.
Example:
To pump 37.9 lpm (10 gpm)
against a discharge pressure head of 3.4
bar (49 psig) requires 4.1 bar (60 psig) and
35.7 Nm
3
/h (21 scfm) air consumption. (See
dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig) air
supply pressure.
Height .................................. 279 mm (11.0")
Width ................................... 267 mm (10.5")
Depth .................................... 229 mm (9.0")
Est. Ship Weight ........... Aluminum 12 kg (26 lb)
Stainless Steel 16 kg (36 lb)
Alloy C 18 kg (40 lb)
Air Inlet ......................................6 mm (1/4")
Inlet ............................................ 25 mm (1")
Outlet ......................................19 mm (3/4")
Suction Lift ...................... 7.43 m Dry (24.4')
9.68 m Wet (31.8')
Disp. per Stroke ............... 0.35 L (0.092 gal)
1
Max. Flow Rate ................. 129 lpm (34 gpm)
Max. Size Solids .....................3.2 mm (1/8")
1
Displacement per stroke was calculated at 4.8 bar
(70 psig) air inlet pressure against a 2 bar (30 psig)
head pressure.
Example:
To pump 37.9 lpm (10 gpm)
against a discharge pressure head of 3.6
bar (52 psig) requires 4.1 bar (60 psig) and
23.8 Nm
3
/h (14 scfm) air consumption. (See
dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig) air
supply pressure.
