WIKA KSR KUEBLER BGU D Series, Руководство по эксплуатации

Страница: 50 / 68

50 KSR KUEBLER Operating instructions Bypass magnetic switch - BGU-...D
6 Faults
The most frequent causes for faults and the counter-
measures necessary are listed in the tables below.
Fault Cause Measure
Bypass magnetic
switch cannot be
attached in the
place intended Collision with other attach-
ments Reconstruction of the at-
tachments or return to fac-
tory
No signal or in-
correct signal
Electrical connection incor-
rect
See Section 5.4 “Electrical
Connection”.
Check configuration with
the help of the circuit dia-
gram.
Reed contact defective Return to factory
incorrect switching behav-
iour Change terminal configura-
tion
Switch position incorrect Re-position BGU
Cable ripped off Return to factory
Switch is not triggered by
float Return to factory
CAUTION!
Bodily injuries, property and environmental damages
If faults cannot be remedied with the help of the measures
listed above immediately decommission the device.

Ensure that there is no more pressure and protect
against accidental commissioning.

Contact the manufacturer.

In the event a return is necessary note the instruc-
tions in Section 8.2 “Return”.