WIKA IPT-10, Руководство по эксплуатации

Страница: 19 / 56

6 S et up with the indicating and adjustment
module
6 . 1 S hort description
T he indicating and adjustment module is used for measured value
display
,
adjustment and diagnosis
. I
t can be mounted in the following
housing versions and instruments :
l
A ll sensors of the IPT -
1
* instrument family , in the single as well as
double chamber housing ( optionally in the electronics or connec -
tion compartment )
l
E xternal indicating and adjustment unit
N ote :
Y
ou can fi nd detailed information on the adjustment in the operating
instructions manual " I ndicating and adjustment module " .
6 . 2 I nsert indicating and adjustment module
T he indicating and adjustment module can be inserted and removed at
any time . I t is not necessary to interrupt the voltage supply .
F or installation , proceed as follows :
1
U nscrew the housing cover
2
P lace the indicating and adjustment module in the desired position
on the electronics ( you can choose any one of four di ff erent
positions - each displaced by
90
° )
3
P ress the indicating and adjustment module onto the electronics
and turn it to the right until it snaps in
.
4
S crew housing cover with inspection window tightly back on
R emoval is carried out in reverse order .
T
he indicating and adjustment module is powered by the sensor
,
an
additional connection is not necessary .
F unction / C on fi guration
M ount / D ismount indicat -
ing and adjustment
module
P
rocess pressure transmitter
IPT -
10
V
ers
.
2
.
0
-
ceramic sensor
• P
ro fi bus
PA
19
6
S
et up with the indicating and adjustment module
31541
-
EN
-
110418