WIKA F3201, Руководство по эксплуатации

Страница: 13 / 44

13 WIKA operating instructions, model F3201
EN
79101735.01 08/2021 EN/DE


F

F
5.3 Mounting
5. Commissioning, operation
Place the shear beam

onto the mounting surface

. It must only rest up to the notch

. With M12 screws (property class 8.8) a tightening torque of 90 Nm is recommended.
For safety-relevant applications or if the application is subject to official regulations, the
calculations corresponding to that standard must be carried out.
Screw the shear beam

to the mounting surface

. Load the shear beam in tension or
compression, depending on the calibration. The direction of force can be read from the
arrow on the product label.