WIKA data sheet CT 15.51 ∙ 03/2019
Page 11 of 15
V
out
V
in
mA
GND
+
-
Test
item
Features
Manual or automatic current source function
Applications
The CPH7000 can be connected in place of a transmitter
within a current loop and used as a current source.
The transmitter output signals from 0 ... 24 mA can be
simulated through manual input or automatically using the
ramp and step functions.
Operating mode: Simulation of transmitter signals
V
out
V
in
mA
GND
Test item
4 ... 20 mA
+
-
-
+
Features
■
Logging of max. 3 signals/measured value at the same
time
■
Automatic or manual data acquisition
■
Direct display as graph or table
■
Logger protocols are automatically saved
Applications
■
Logging of current, voltage, pressure and temperature
■
The logger menu guides one, step by step, through the
logger process. The data sets, incl. date and time, are
automatically saved in the CPH7000.
■
Before logging the data, routines can be set directly on the
instrument or uploaded via WIKA-Cal software.
■
Re-logging possible
PC software available
Communication with WIKA-Cal calibration software via
WIKA-Wireless
Operating mode: Logger
Menu screen of the
operating mode „Logger“
Representation of logger
results as table
Representation of logger
results as graph
