WIKA A-AI-1, Руководство по эксплуатации

Страница: 14 / 52

EN
WIKA operating instructions attachable indicator model A-IAI-1 14
14016825.03 12/2018 EN/DE
5. Transport, packaging and storage
5. Transport, packaging and storage
5.1 Transport
Check the attachable indicator for any damage that may have been caused
during transportation. Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport
(e.g. change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
■
Storage temperature: -20 ... +50 °C
■
Humidity: 0 ... 80 % r. h. (non-condensing)
Avoid exposure to the following factors:
■
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Potentially explosive environments, flammable atmospheres
Store the attachable indicator in its original packaging in a location that fulfils
the conditions listed above. If the original packaging is not available, pack
and store the instrument as described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the packag-
ing.
3. If stored for a prolonged period of time (more than 30 days), place a bag
containing a desiccant inside the packaging.
WARNING!
Before storing the instrument (following operation), remove any
residual media. This is of particular importance if the medium is
hazardous to health, e.g. caustic, toxic, carcinogenic, radioac-
tive, etc.