WIGGENS WH220-HT
4.3.3. Operation of the Hot Plate/Stirrer without a Temperature Sensor
1.Switching the Hot Plate/Stirrer on
Plug in the power cord and turn on the main power switch
Switch the hot plate / stirrer on by pressing the main switch on the
right side of the instrument.
The display lights up and shows the model and software version of
the instrument.
2.Setting the temperature
e.g. The Set temperature is 70
℃
Press the SELECT Button to select Set Temp
Press the Up Button and Down Button to set the required
temperature
3.Setting the stirring speed:
e.g. Set “RPM” is 800
Press the SELECT Button to select Set RPM
Use the Up Button and Down Button to set up the required stirring
speed
4. Starting the Instrument
e.g. The actual temperature is 70
℃
e.g. The actual “RPM” is 800
After all the settings are completed, press the START / STOP Button to
start the stirring / heating process.
The START indicator will light up
In order to monitor the actual temperature / stirring speed press the
SELECT button to select Pro.TEMP / Pro.RPM.
5. Switching off the Hot Plate/Stirrer
Press the start/stop button again, and turn off the main power switch
The Hot Plate/Stirrer is now switched off.
17
