14
Manual mode:
7.
Set the selector switch on the control cabinet to
manual operation (2).
8.
Drive into the K60-AKB with a full box.
9.
As long as either the
start/outward (8)
key on the remote control or the
raise (3)
key on the control cabinet
is depressed, the K60-AKB will tip the box until the end position is reached.
10.
If the
stop/return (6)
key on the remote control or the
lower (4)
key on the control cabinet is pressed, the
stationary box rotator will return to its start position.
11.
Exchange the empty box for a full one, and repeat the previous actions.
The WIFO stationary box rotator is now ready for use.
1
2
3
4
5
6
7
8
Figure 2.3.3-K60-AKB control cabinet and remote control keys
Where the K60-AKB is set up as a fixed installation it is recommended that it be secured using four
anchors in the floor
