Wiener CC-USB, Руководство пользователя

Страница: 14 / 31

WIENER, Plein & Baus GmbH 14 www.wiener-d.com
Yellow LED and NIM O3 Green LED and NIM O2 Red LED and NIM O1
14 13 10-12 9 8 5-7 4 3 0-2
Latch Invert Code Latch Invert Code Latch Invert Code
The 3-bit code identifies the source of the signal. The sources differ for different LEDs and
NIM outputs, but they are the same between the LED and NIM targets (i.e., Red LED has the
same sources as the NIM output O1, Green LED the same as O2, and Yellow LED the same
as O3) For firmware 4503, the sources are as follows:
Code Red LED Green LED Yellow LED
0 Event Trigger Acquire NIM I3
1 Busy Camac F1 Busy
2 USB Trigger Reserved NIM I2
3 USB Out FIFO not empty Event Trigger Camac S1
4 USB In FIFO not full Data Buffer Full Camac S2
5 Reserved Reserved USB In FIFO not empty
6 Acquire NIM I1 Executing scaler stack
7 Camac F2 USB In FIFO not empty USB Trigger
Code NIM O1 NIM O2 NIM O3
0 Busy Event Trigger EndOfBusy
1 Event Trigger Camac F1 Busy
2 USB Trigger Reserved NIM I2
3 USB Out FIFO not empty Event Trigger Camac S1
4 USB In FIFO not full Data Buffer Full Camac S2
5 Reserved Reserved USB In FIFO not empty
6 Acquire NIM I1 Executing scaler stack
7 Camac F2 USB In FIFO not empty USB Trigger