29
2. Operation:
The detector is ready for use
●
Switching:
●
if there is presence and insufficient daylight, the detector
switches on the lighting.
Constant light control:
●
if there is presence, the detector sets the
lighting to the desired brightness.
If there is no presence or sufficient brightness, the detector switches the
●
lighting off.
5. Setting the Brightness Value
Using the service remote control (optionally available), the desired bright-
ness can be easily set.
Set the brightness by adjusting the artificial
●
light and blinds until the brightness in the
working area corresponds to the desired
value.
Example:
400 Lux is required in the wor-
king area. The blinds are adjusted so that
the light meter shows around 400 Lux.
In case of dimmable lighting, the brightness should be made up of half
●
artificial light and half daylight where possible.
GB
200 Lux
