All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
19
2.0. Assembly
2.9. Mounting the magnetic bar
2.9.2. In the trailed version
The magnetic bar is attached to
the front lugs of the basic
unit.
Slide the brackets of the
magnetic bar onto lugs
(E)
and
securely screw on.
Remove set screw
(F)
for
swivelling the magnetic bar.
Then insert the set screw in
the suitable hole pattern and
secure.
Release clamping screws
(G)
.
Place the magnets on the lower
holder surface
(arrow)
and
align laterally.
The holder is always to the
rear.
Tighten clamping screws
(G)
.
Screws
(H and J)
may not be
tightened as the magnetic bar
must remain movable.
