All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
29
3.0. Assembly
3.7. Installing optional golf-course kit
Setting the working height for
the multifunction head
The working height is set by
turning the cranks on the
right (A) and left (not shown)
side of the front roller.
Turn the cranks clockwise:
The multifunction head is
lowered.
Turn the cranks anti-
clockwise: The multifunction
head is raised.
Use the scale on the left
(B) and right (not shown) to
set the working height
identically on both sides.
3.8. Installing optional super contour kit
The super contour kit consists
of two components:
-
baffle flap rail with front
rollers
-
divided trailing roller at
rear
Remove chain curtain and use the
fastening bolts for installation
of the baffle flap rail with
rollers
(A)
Bolt the baffle flap rail with
rollers
(A)
to the multi-
maintenance head in the place
of the chain curtain.
A maximum of two U-washers (B)
per fastening bolt (C) can be
used.
