All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
27
3.0. Assembly
3.6. Installing optional anti-scalp rollers
The anti-scalp rollers ensure
that only the verticutting
blades touch the ground and not
the fly regulators.
Setting anti-scalp rollers
NOTE
Make the same anti-scalp roller
setting on both sides.
Release upper screw (A) and
remove with lock washer.
Swivel locking plate (B)
downward.
Hold anti-scalp roller (C)
firmly in position and pull
out pin (D).
Secure the anti-scalp roller
(C) with the pin (D) in
another bore at the desired
height.
Swivel locking plate (B)
upwards and screw in.
